Hi Welcome Today we will learn how to work with Kit Raisin (resin) and how to deal with the shortcomings that Kit has Enjoy friends Hello friends How are you feeling today? It's great today I will show you how I make the body of the Honda we will work together I have the tools I need here I have everything I need and also in this video I will show you how to paint in a primer paint company it is a very good acrylic primer I finger at a close look For you to see there were some people who asked to see up close and not like the previous project so this project will be from close up photography you will see the painting from my hood you will see how the paint touches the model and is painted and of course you will see up close how I prepare the model for painting and repair areas Pay attention to details, there are a lot of small pucks that need to be sanded it is not a perfect body need to process it a bit and we will do it together but it will be 🙂 I promise you so let's start I'll organize my things I'll turn the camera and see what I do with the tools I need and remember If you have any questions about the kit I am here for you let's start here and now so you are here very well now I will show you the tools Professional locomotive Sponge Sanding 400 and Sanding 1000 and Sanding 600 Micromash sanding stick Tamia 0.2 grooving knife and my Mr.
Hobby power tool Very useful and I will show you what I do E with him so first of all I look at the body and see where I have pucks in the body preparation in the factory it does not come out perfect so need to fix in some places need to sand and see if everything looks good with the hand see where there are scratches or pucks on the model so let me show you what I do So first thing I have here is a piece I do not need it came from the manufacturing process of the body I need to cut it so what I do takes the locomotive and cut it is a piece I do not need in the model do not be afraid to do so then I take the power tool and start to lower material gently Then I sand with a sanding stick. You see, friends. The first step. Let's go. Let's deepen all the grooves in the model.
So i need to groove them a bit so how do i do this i use my tool groove and go into the groove and then take material out do it several times 3 or 4 if you feel you want a deeper groove do it again with it times see how I deepen the grooves very Easy Do this slowly and gently for a grip Good and stable My tip for you do not insist that you hold the tool like a pen Always have the model on the surface and always put your fingers on the model It will improve your stability with the tool See my hands facts A very important tip to you friends Okay let's go I will do all the grooves And we will continue to the next step. The third step is sanding the model. On the skirts and the front bumper then we will have to smooth all these areas and then I will show you how I paint the model in a primer and that was all for today so first thing I look and check well where to sand more or less I check the parts and start sanding I take sandpaper And starts with the craft To the sea this vehicle was built for my friend who has been waiting for her for a long time Dear Michelle she is with you soon so more or less I work on the body in sanding up all the pucks then go through the whole model with a gentle sanding sponge 1000 also on the hood I have some packs needed Align and surface I sand with a sanding sponge 400 the hood and straighten the surface It is important not to sand in these rounds back and forth.
Flatten the entire surface. Questions I am here to help you Let's move on to the painting process with a paint gun I hope it will help you see and understand how to do it I received a lot of requests to show up close so here's the closest I can hope it does now it's time I told you I'm constantly learning what you want to see up close I will finish the body in preparation and paint it together friends the body is ready and now we will paint it together in primer it is the primer I use on the left now I can show you a closer look how I dye I will try to talk between and you will understand as I always say in dyeing the first layers must be deer A fine layer of paint Do not spray a lot of paint Fine layers Friends not much paint is very important now I will let the model dry for five minutes and we will do the second coat at the same time I check where I need to sand a little more to surface areas I missed because the white primer is easier to see Where there are defects drying time 5 minutes and continue 5 minutes for it and can be painted in a second layer I had pucks here so I sanded again and now a second layer finger a little thicker my air gun is clogged with paint so what I do takes a case with a little thinner and clean the edge this is how friends do it You enjoy then how you have not yet subscribed to our channel 🙂 The last layer of primer The task is complete 🙂 So friends it's all for today you saw me preparing the body for primer and dyeing it I also painted some parts in the next video Make a carbon sticker on the hood I hope you enjoyed the process I am constantly learning how to make you better and more interesting videos Give me a chance I am a little new to YouTube but I promise you always get better for you Amazing car We will do nice things with them No more talk See you next time Friends Rosomodels
