And this is another episode of RC Modify. In this episode, we're going to
be assembling the M-Drift 2 Chassis. We have all the hardware and the 3D-printed parts. I haven't cleaned them yet. I'm gonna do that now. You see these, guys. These are meant to be… broken off, if you wanna use the space. If I'm gonna use this engine,
I'm gonna have to break these off. There's a little bit of glue here.
I'm gonna use alcohol to clean it up.
And we are pretty much done, guys. I'm gonna use a lighter to get rid of some plastic hairs. Silicone Crease. Make sure it's tight first. And now try to make it more freely. And now unscrew a little bit. Here, I have the shocks but
the springs are too soft. Here, I have new springs that are a lot stronger. I'm not gonna use the screws
that come with the shocks. Don't tighten this all the way.
Make sure it can move. I'm going to be using channel 5. On this side, the hole is right on this line. And on this side, the hole is on this line. These are engine mounts. And of course, you have to remove
this one when you put the engine in.
These are the body posts. If you don't use this
one right here, you can just use the straight one. But if you're using it, you will have to use this one. And I'm about to show you guys something really cool Don't screw this one in too tight.
Otherwise, you will break the magnet. Double-sided tape. Copper foil tape. With this setup, you will have
up to four wires to run to the body. And now I'm gonna… do the same thing for these ones. This right here is for testing guys to show you how it works. And now, what we need is a body. This right here guys, is a
widebody Supra Mark V from RC Supremacy. if you want to find out how Brad made this awesome drift body. You can check out the videos on his
channel the links are in the description.
We need new wheels. Let's put some racing seats on it. I'm gonna use this switch as a clutch. Now the lights. I will put positive and negative here. Forward and backward signals. Left and right signals. Yeah. It's time for some LED lights. I got a bunch of rectangular LED lights. So you guys gotta ignore the
numbers on the plastic parts and follow the diagram exactly like that. I'm gonna use tape over the paint and
use a glue gun to secure the LED light. It's working, guys. I'm going to add another servo switch
on channel 4 for the LED lights. So having just one wire
cut off is not good enough, guys.
It was twitching a little bit as you can see, because
I have one wire cut out and the other wire is still there. So I want 2 switches to cut off both wires. Next, we're gonna put these on. I'm gonna add a voltmeter on it, just to make it cooler. I'm gonna adjust the position of the calipers. The front wheels are perfect inside
the wheel wells, but not the back wheels. This is a spacer set for the wheels. I'm not gonna use these. I'm only gonna use these ones. I have to trim this off a little bit. I have to trim this off a little bit. So somebody just told me that,
this right here has a gyro built in. So, all you gotta do is turn it on.
I have to reverse it. And there you have it, guys. M-Drift 2 Chassis with a Supra Mark 5 body. It will be listed for sale.
Everything will be in the description. I hope you guys enjoy it and find this helpful.
Thank you and have a nice day. Sa-Wad-Dee Khrab..
