RC-Car Vorspur/Nachspur – Endpunkte – Sturz – Auswirkungen auf das Fahrverhalten

welcome to the rc workshop. this video should be about toe-in, toe-out, generally drive straight. the track to adjust. to turn something like that this video is a request from…

Dash Cam and Car TV Monitor Kits

Dash Cam and Car TV Monitor Kits Discover the best dash cam kits, aftermarket backup camera sets, and car sensors as well as all kinds of headrest TV and car…

Adam Savage’s One Day Builds: Car Engine Model Kit!

hey guys adam savage here in  my cave with a one-day build   that is i'm taking a break um i'm right now in  the middle of my mandalorian embar rifle…

RC car wheel angle – How to adjust the RC car camber – RC camber expert

Hello you beautiful people. My name is JOHN. Welcome to my channel. Today we have the 144001 from WLTOYS and we're going to be talking about camber. What is camber? let me…

The wonderful world of one-off fiberglass kit cars | Barn Find Hunter – Ep.42

(twangy music) – This is what shakes a woody apart. This is why after every adventure I have to go back with a big screw driver and tighten up all…

Adam Savage’s One Day Builds: Car Engine Model Kit!

hey guys adam savage here in  my cave with a one-day build   that is i'm taking a break um i'm right now in  the middle of my mandalorian embar rifle…

Adam Savage’s One Day Builds: Car Engine Model Kit!

hey guys adam savage here in  my cave with a one-day build   that is i'm taking a break um i'm right now in  the middle of my mandalorian embar rifle…

#1 TAMIYA 1/12 RENAULT RE20 TURBO – Unboxing

Hello and welcome to our unboxing of the Renault RE20 Turbo Tamiya kit 1/12 scale Again Tamiya always providing the best instructions. Very clear and concise This is the chrome…

Part 4 | Daytona Coupe Kit car build | Installing the front Koni Coil over shocks

hey everybody welcome to ocala garage  daytona build uh so this episode i'm going   to be assembling the uh front uh coilover  shocks so standby we'll see how that goes  …

HOLDEN HQ GTS MONARO On the Work Bench (Part 1)

ホールデン モナーロ タイプHQ-GTS 製作記 1/25のレジンキットです。 どこ製かは言わない事にします。 私はハッキリ思いました、 このキットを作ることは決してないだろうと。 手を加えるところだらけです。 フォルムが、まったく実車と似ていません。 ちょっと太りすぎ・・・。 しかも左右対称でありません。 なので箱を閉じ、棚の中に長く眠らせていました。 しかし、次に開催されるシドニー・スケール・モデル・ショウが「最後のショウだ」と聞いたのです。 形を作り変え、研いでいく事を決心しました。 しかし、それはイバラの道の始まりだったのです。 ほとんどのスジボリを埋め、平らにしていきます。 ボンネットの峰を削ってしまいます。 サンディングの日々・・・ それが数週間続きました。 リアの中央の峰はモールドされていませんでした。 なので、削り出しました。 ここまでで2週間。でもまだまだです。 エッジを効かせていきます。 ボンネット中央の峰を作りました。 サンディングし、プライマーサーフェイサーを吹きました。 「ビフォー」写真 相当良くなってきました! お尻も相当痩せてシャープな印象に。 さて、顔の整形に移ります。 ヘッドライト・トリムの型を使い古しのまな板に掘っています。 0.3㎜のアルミ板を使います。…