Sa-Wad-Dee Khrab.
Hello everyone. My name is Mackey. And this is another episode of RC Modify. In this episode, I just made a custom chassis. Let's go see how I made it. And now we have the chassis and everything printed out. I have all the necessary parts here. First of all, I have to clean off the support materials. Let's start with that. And now, it's time for assembling. I'm gonna start with the rear differential. Now usually, this will come with a case, and everything
and you'll have to take it out. take everything inside out because we're gonna make it lock differential. And that's what we're gonna do. I already lock this one but I'm just gonna show you guys everything. These are the locking pieces. The new ones will be in blue. This chassis has an adjustable wheelbase from 257mm to 260mm. It turns out that, this right here has too much vibration.
I'm gonna use this instead, just to try it out. So I cut the frame off. Put these stock bone cups on. It was a lot better now. Though it's still too fast because of the brushless motor. But I have a way to get around the speed. It is a transmitter and receiver. It got a throttle dual rate. TH.D/R Right there. That will control the speed of
the brushless motor or any motor out there. And also, the FlySky FS-GT3B will have the dual rate option for all 3 channels. And so yeah, you get the point. If you don't want to change the dual rate,
then you will have to find the motor.
Like 55 turns (55T) or 45 turns (45T) but it will be brushed. This one is a regular 7.2 volts (NiMh). It's not a Lipo battery but you can use a lipo with this ESC. By changing the jumper position here, you'll be able to use the Lipo battery. But right now, I'm using the regular one. (NiMh) And that is as fast as it's gonna get, guys. I got a thin washer with me for the bearing, so that it will work properly. I have the front axle here but I have to cut this part off. I have this, right here on the table but it doesn't work well at all. And that, guys… is my solution. I don't have a lathe. I think I should buy a lathe. (machine) That is a steering dual rate. (ST.DR) This comes in handy when you don't want to turn too much. This is this? MEOW. I made these parts just so that the engine can stand like that. You can cut them off once you find the place on the chassis. Just like how I am cutting them off right now.
I'm gonna be using a 180SX body. It looks like the battery is in the way of the seat. So, I'm gonna move the battery to the back. I also got the Rocket Bunny kit for this 180SX. I got these from rcMart.com I also got a bunch of things. So, I will show these in the next video. And in the next video, I'm gonna improve the chassis a little bit.
I will try to add some servo to make it able to lower and lift itself up. For me to do that, I'm gonna need a transmitter and receiver with 3 channels. I recommend this one right here. It's pretty cheap and it got 3 channels. I already got the batteries (4 AA) in there. It got power, channel 3 right here. You can adjust the steering dual rate. The Throttle direction. The Steering direction. On top here, you will have the reverse switches. And you have a throttle limit or throttle dual rate. Low, Medium, and High. And now for the 3rd channel (CH3) that
I will use it to control the chassis height. And there you go. You can get this from RcMoment.com Link in the description. If you're in the United States, make sure to click on
US warehouse, that way it would be a lot cheaper. And there you have it, guys. I will be back soon with Part 2. I hope you guys enjoy it and find this helpful.
Thank you and have a nice day. Sa-Wad-Dee Khrab. I'm sleepy. MEOW..
