Very good and welcome, children of rock and roll. Today I bring you to the Channel the assembly of this fantastic NSX GT3 bodywork from Escaleauto, a car that you are already seeing with this beautiful decoration by Mugen Castrol and if you want to see it, you know how to stay with me. in the eye of the hurricane good again Well we are going to start with the assembly of this fantastic Honda nsx bodywork we have here a decorated exam that is going to be what we are going to assemble the painter is José Hernández Santiago more popularly called El canario and by here we have this decoration of women in castrol that is very cool I loved it When I saw it I told him José paint it for me and well And this is the result bodywork spoiler mirrors we are not going to ride here we have the glass with its windshield the rear windows good crystals the rear lights excuse the rear grilles of the rear bumper the rear glass the rear window a side air intake that this has a crumb I will comment on it now We have the front grilles and over here we have one of the headlight lampshades.
Well, we are going to start by explaining this piece here, which is this one that is here already assembled, this one that is missing here on this side, and the thing is that this piece already has it. José El Canario has assembled it here, this has a hand, you have to discover where each one goes. I think that one of the two will be longer than the other and that's good. The assembly is somewhat complex because that lug then we have to face it in this part of the glass so it will remain as you see, good to assemble it, it is very simple to assemble it. You simply have to face it in the lug below and a Maybe we have it there, we have to face this piece here with the rib that holds the leg to adjust the height of the body .
Or it also enters above the glass support. So all those parts, well, you have to take it into account so that it remains properly positioned when fixing this piece, what we are going to do is put a drop of cyanucrylate on the upper part in order to try to avoid what we always talk about, which is that the bodywork loses the minimum flex if you like the torreslot channel Do not forget to subscribe and if you do not want to miss any news Do not forget to activate the bell in this way you will help me to continue doing more videos Thank you very much for this we are going to put a drop of cyanoacrylate superglue on a piece of cardboard and with a needle we are going to collect the amount we need and we are going to add it there in the corner until we get the glue that we think is convenient we are going to leave it Very little by little , well, that pin would already have the other one .
Of the rear window has been worked on, as you can see in the video of the preparation of the bodywork of the Ferrari that is on the channel, the holes are a little wider with the typical aliexpress bits that have ever appeared on the channel Although these are very narrow because they go in Step of a tenth and in this way we have enlarged the holes a little to get this to enter without any problem in its place. You have already seen that I have let it fall to see and it only enters its place well for fixing of the rear window we are going to [ __ ] rubber washers src o-ring we are going to place it on top of the lug This lug is a bit wide so what we are going to do is force the rubber until we manage to move it over the lug right there I have already placed one and the mission of this is to take it to the end with a pair of tweezers, there it is once we have it in place, what we are going to proceed is to force the moon down a little and we are going to look for a place where the moon remains with a little loose movement but does not look too out of place Well my point is this there you can see how I raise the moon is free and from the outside well now when we put the other points it will be seen Better We are going to place the other points and we will see this to fix it.
Likewise, we are going to [ __ ] a little drop of cyanoacrylate that had been added before and we are going to put it on the upper part of the joint. The cyanoacrylate should never come into contact with the that it is the moon only with the gasket and the lug to make sure that it stays in place and that the moon will never fall downwards in this way I already have it good for the front glass here a burr has remained on the part upper So let's [ __ ] a file and we're going to clean that burr yes Until it disappears here's another one ok I've got it Well, just like the rear window that you have already seen how it has turned out with a little movement I don't know if I know can appreciate Here, how do I move the glass up and down ? Well, we are going to insert the front window from the front.
We are going to insert this. Here we are going to try to face the other one in this way and you have already seen that it enters its place perfectly and without problems. Well, here the sides I am not going to put anything at all, it is going to remain free, I am going to fix a washer up here, I am going to put this one very firmly in its place, I push it down well, there it is and we return to add a little bit of cyanoacrylate We distribute well like this in this way I already have the windshield well attached with the side windows and we still have some flexibility, good for mounting the headlight lens. You simply have to face that little piece at the rear And then the front point to its place make sure that it enters well until its position applying a little force and in this way we have it we are going to [ __ ] another Droplet of cyanoacrylate we put a fixing dot there with that left over a a little here behind and we already have it ready when it comes to placing the front grill we have to face those holes that are there with those three little pivots that we have here on the nose, therefore a piece of advice about something that I have seen that can work quite well is to briefly review here with a mouse tail each one of the housings where a pivot of these goes for its placement we simply have to face the front grille through the guides that we have here on both sides of the body.
When we arrive at the site we will push the piece forwards and downwards and in this way it has already entered and it is such that it has entered the bottom part this is difficult for it to come out of its place but if you want to make sure with another O-ring, then that from there cannot be moved for the rear tulip these holes here are also a little revised and the central ones that are the exhaust pipes Also for its placement You simply have to face the holes that Have you seen There it is facing the exhaust pipes and this side of here would be missing There it is already in its place if you like the torreslot channel Do not forget to subscribe and if you do not want to miss any news Do not forget to activate the bell in this way will you help me to continue making more videos Thank you very much to secure this rear grill we are going to put only two O-rings on the side lugs we place it like this on top we put it we take it out a little from the site and we leave a drop of cyanoacrylate ready I repeat the operation Good One of the few things that José has left stuck has been the simulation of radiators, you can see there Three dots of glue This adhesive is Blue in glaze, an adhesive that when you are going to handle it is white and when it dries it remains this way transparent and It doesn't fume.
I think I showed it somewhere in some bodywork assembly, but this glue doesn't work for me, it comes in a very large format and it always ends up drying out. or for someone who is dedicated to painting or decorating bodies, as is the case with José Well, it does work for him and he doesn't get hard another thing that has left me stuck but that is very easy to install has been the rear bumper that He has also put it there in these points that he pointed out. Here also the adhesive has simply inserted the rear bumper and that's it, as we are going to place the rear lampshades of the pilots, the rear lampshades are when putting the paint the holes where it has to be embedded have closed a little with that grammage of the paint So I have sanded myself well with the scalpel I have sliced the paint from the lower part where the tongue and groove goes for its better placement Likewise also with a file with a half round in its flat part I have dedicated myself to sharpen and lower a little all the entrances through which the tongue and groove has to enter its place.
Then we are going to place it in its place and we only have to press for it to arrive to enter your accommodation there it is worth making sure that everything enters to its place and simply putting a little bit of cyanoacrylate or almost better in this case b7000 to avoid the vapors since here there is a lot of transparent area and it can look good in not the side because it has a red color So here I am going to drop a little bit of cyanucrylate okay with that amount it would go well anyway so to make sure a little we are going to [ __ ] a little bit of b7000 and I am also going to let him deposit there a small amount since the 7000 one, being more rubber in the event of an impact, has less to split and since you have elasticity, it can absorb more of the blow before the piece cracks and loosens.
Well, we almost have it . In principle, I am not going to edit the video, so we would only need a spoiler that I never fix the spoiler in a strong way, that is, they have Pilate, I totally discourage it, simply to the legs of the spoiler as they enter Here you can see a little bit of b7000 to prevent it from coming off easily and that's it but it is 10 times preferable from my point of view that the spoiler jumps in the event of an impact than having to break the legs of the spoiler and being left without a spoiler sleeve just a a little bit of 7000 we drop it like this a small amount and with this there is enough to proceed with the pasting of the exam we are simply going to cut the exam And now I will explain how I like to place the exams we are going to test if we can put it in its place okay I see that This piece here is quite hindering us and you have already seen that I have left it for last.
You have seen that I have cut out the parts that are dedicated to fixing, we are not going to fix it from there. And by the way, it only gets in the way where I want it to be. dedicate myself to placing it, which is in this nerve here of the front lug, we are going to cut until it barely bothers and enters its place, okay, I see that it has to go further forward, much more, it still has to go more Further forward, okay. Things are starting to add up, but it still has a little more to go, a tad more, we're going to round off , we're going to take as a reference that I want to place it, for example, in this car on the O-rings that we have placed on the rear window.
It's going to stay there and the front doesn't bother me anymore and it's going to stay there And now I'm going to explain the trick to something I've always done in exams and it always works great for me. Let's see it. It is the place that it is going to occupy, we are going to fix it in the back part, in my case with 100 pilates and you prefer b7000, well, what you see in my case, how the moon is decorated, well, I will not have a problem with vapors with the cyanoacrylate, so for It is for this reason that I put 100 in this case oklato well We are going to let him shut up a bit we are going to make sure that the perfect exam is in place and now comes the trick of the mendruco well I have run out of material with specifically I was going I'm going to teach you the trick, but I'll tell you what this reference to the manufacturer consists of.
Thunder slot sells you these foam rings, which is also good, since in reality they work to change the springs for them and make the suspension effect okay. Well, the manufacturer gives It just so happened that I have emptied all of them. The manufacturer sells you this little piece of foam with its interior, which is nothing more than a cylinder of foam, so how did I run out of that one ? An idea is like a piece like this and it is a matter of gluing one part to the bodywork at the front point and the other part to the test using this form we will prevent the test from exerting force on the bodywork and it will always have some movement and I see nothing that would that prevents it from going up to its natural area is this little toton here and the one on the side So we are going to save it by cutting it out there it is something that is out of sight from outside there it is Well we are going to save it It's better, okay, we're going to do it, I'll give myself the other one.
And now I'm going to show you that I'm going to impregnate this time in cyanoacrylate and I'm going to deposit it at whatever height seems to me, trying to orient it downwards . to the place at the height more or less that I like and there it will stay, opening downwards very well , it's okay in this way. ] a more natural position, the truth is that I like this result better and we are going to continue having that movement independent of the test with respect to the bodywork, so better Well, nothing until here, the video.
I hope you liked the result, in the end we have this flexibility, thanks to this O-ring and how we have glued and worked on the bodywork, the glass housings and so on. I hope you liked the truth that I am in love with this decoration and see you in the next video bye.
